1. Feature and purpose
LYT―704B
protective agent for hydroprocessing catalyst is made with the carrier of
micropore Al2O3 and the active component MO and Ni. The catalyst has a tooth
ball shape with the porosity over 45% and the feature of high activity of
demetalization, high dirty capacity and lowered bed pressure.
2. Quality index
Items |
Index |
Appearance |
Pale yellow tooth ball |
Size, (mm) |
Φ2.5~3.5 |
Specific surface area (m2/g) |
>100 |
Pore volume (ml/g) |
>0.50 |
Average crushing density (N/cm) |
>30 |
Normal filling bulk density (g/ml) |
0.45~0.55 |
Active component |
Ni, Mo |
3. Applying conditions
(1) Material: Being applicable to the hydroprocess of
distillate and heavy oil.
(2)
Operating pressure: 40~20.0Mpa
(3)
Applicable temperature: 250~400℃
(4) Liquid airspeed: 10.0~20.0h-1
4.
Package, transportation and storage
LYT―704B protective agent for hydroprocessing catalyst is put into hard fiber
cans with covers and inner plastic bags. It has the name, net weight, batch No.
and production date on the outside of cans. It will be covered and kept from
damp, vibration and strong impact. It is forbidden to roll and throw the
catalyst barrels in transportation and handling. It should be stored in the dry
and ventilated storehouses and paid attention to moisture-proof. It is forbidden
to contact with acids and the hazardous substances of alkali chemical reagent to
avoid affecting the activity of catalyst.
(Note: The document about the filling, sulfuration and
operating specifications will be provided separately)